 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EURO QUARTZ DESCRIPTION HPA576 series LVPECL output oscillators cover the frequency range 60MHz to 320MHz. The part utilizes a crystal operating in third overtone mode (Non-PLL) SPECIFICATION Frequency Range: Output Logic Phase Noise: Frequency Stability: Operating Temp Range Commercial: Industrial: Input Voltage: Output Voltage High '1': Low '0': Rise/Fall Times: Current Consumption: Load: Start-up Time: Duty Cycle: Input Static Discharge Prot: Storage Temperature Range: Ageing: Enable/Disable No connection: Disable: HPA576 LVPECL OSCILLATORS 7x5mm SMD 6 pad 60.0MHz to 320.0MHz LVPECL See table See table -10 to +70C -40 to +85C +2.5VDC or +3.3VDC 5% Vdd -1.025V min. Vdd -1.620V max. (RL = 50W to Vdd -2.0V) 0.25ns typical (20% Vdd to 80% Vdd) 75mA max. at 212.50MHz 50W into Vdd-2.0V 5ms typ., 10ms max. 50%5% (at Vdd -1.3V) 2kV min. -55C to +150C 3ppm per year max., 2ppm thereafter. At T amb +25C OUTLINE & DIMENSIONS Both outputs enabled Both outputs are disabled when control pad is taken below 0.3V referenced to ground. Oscillator is always 'on'. (Special request oscillator is off when disabled.) Enable: Both Outputs are enabled when control pad is taken above 0.7 Vcc referenced to ground. ABSOLUTE MAXIMUM RATINGS (Permanent damage may be caused if operated beyond these limits.) Supply Voltage Vdd: +4.6V max. Input Voltage Vi: Vss -0.5 min., VDD +0.5V max. Input Voltage Vo: Vss -0.5 min., Vdd +0.5V max. PHASE NOISE (155.250MHz) Offset 10Hz 100Hz 1kHz 10kHz 100kHz 1MHz 10MHz dBc/Hz -65 -95 -120 -128 -122 -120 -140 STABILITY OVER TEMPERATURE RANGE Stability ppm 25 50 100 25 50 100 Temperature Range Order Code C -10 to +70 -10 to +70 -10 to +70 -40 to +85 -40 to +85 -40 to +85 A B C D E F PART NUMBERS HPA576 oscillator part numbers are derived as follows: Example: Supply Voltage 3 = 3.3VDC 25 = 2.5VDC Series Designation Package Style 5761 or 5762 Stability Code (See table) Frequency 3HPA5762-A-250.000 JITTER Integrated Phase Jitter: 0.25ps typical at 155.520MHz (12kHz to 20MHz) Period Jitter (RMS): 3.0ps typical at 155.520MHz Period Jitter (peak to peak): 21ps typical at 155.520MHz EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: info@euroquartz.co.uk www.euroquartz.co.uk |
Price & Availability of 25HPA5762-A-250000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |